The Caterpillar 924K is a versatile wheel loader that is perfect for a variety of construction and industrial applications. This rugged machine is designed to be reliable and efficient, making it a great choice for any job site. With its impressive operating weight of 26,004 lb, the Caterpillar 924K Wheel Loader is capable of handling heavy loads with ease. In addition, its advanced hydraulic system ensures smooth operation and optimal performance. In this post, we'll dive into the Cat 924K specs and dimensions—gross power, net torque, bucket pin height, etc.
Atributo | Cantidad |
---|---|
Precio del modelo | $177,800 |
Precio de alquiler diario | $700 |
Precio de alquiler de medio día | $350 |
Precio de alquiler semanal | $2,150 |
Peso operativo (libras) | 26004 |
Coste de mantenimiento por hora | $18 |
Costo de mantenimiento mensual | $1,600 |
Costo de combustible por mes | $0 |
Consumo de combustible por hora (galones) | 0 |
Pagos mensuales de financiación (nuevo) | $0 |
Pagos de financiación mensuales (usados) | $0 |
Maximum Gross Power
Rated Net Power @ 1,800 rpm
Maximum Gross Torque
Maximum Net Torque
Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Net power shown is the power available at the flywheel when the engine is equipped with alternator and air cleaner.
Ground Clearance 1.25ft in
Carry Height 1.5ft in
Centerline Of Front Axle To Hitch 4.91ft in
Digging Depth 3.8in
Dump Angle At Maximum Lift 50 degrees
Dump Clearance At Maximum Lift - 45 Degrees 9.4ft in
Height - Center Of Axle 2.21ft in
Height - Top Of Rops/Fops 10.9ft in
Length - Rear Axle To Bumper 6.5ft in
Overall Height - Bucket Raised 16.61ft in
Overall Length 24.4ft in
Rack Back Angle - Carry 45 degrees
Rack Back Angle - Maximum Lift 54 degrees
Reach At Maximum Lift And 45 Degrees Dump 3.3ft in
Wheel Base Length 9.81ft in
Bucket Pin Height - Maximum Lift 12.75ft in
Width - Over Tires 8.33ft in
Operating Weight 28360lb
Forward - 1 8mph
Reverse - 1 8mph
Steering Angle - Each Direction 40 degrees
Steering Cylinder, Two, Bore 2.8in
Maximum Working Pressure 3500 psi
Steering Articulation 40degrees
2 8mph
3 17mph
4 25mph
Standard Transmission Maximum Travel Speeds 25mph
Size 20.5 R25 Radial (L-3)
Bucket Capacities 1.9 m3 - 5.0 m3 2.5 yd3 - 6.5 yd3
Static Tipping Load - Full Turn 16352lb
Articulation Angle 40degrees
Reach - Full Lift And 45 Degrees Dump 3.3ft in
Dump Clearance At Full Lift And 45 Degrees Dump Angle 9.4ft in
Cooling System 7.9gal
Fuel Tank 51.5gal
Crankcase 5.3gal
Hydraulic Tank 23.8gal
Hydraulic System - Including Tank 42.3gal
Transmission 2.2gal
Front 5.5gal
Rear 5.5gal
Pump Flow - Implement Pump 40 gal/min
Maximum Working Pressure 3771 psi
Raise 5.5 s
Dump 1.5 s
Lower, Empty, Float Down 2.6 s
Total 9.6 s
Bore (1) 4.3in
Stroke (1) 28.7in
Bore (2) 5.1in
Stroke (2) 21.9in
Hydraulic Cycle Time 9.6 s
ROPS SAE J1040 MAY94, ISO 3471-1994
FOPS SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II
Cab and Rollover Protective Structures (ROPS) are standard.
The typical dynamic operator sound pressure level is 71 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab.
The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and cab windows closed. The cab was properly installed and maintained. The sound level may vary at different engine cooling fan speeds.
A semi-cab option is available.
The Caterpillar 924K is a great choice for a wide range of applications, including construction, mining, forestry, and more. This machine can be used for loading and unloading materials, as well as for excavating, grading, and leveling. It is also capable of hauling heavy loads and performing other tasks that require a lot of power. Rest assured, the Caterpillar 924K will meet your needs.
The CATERPILLAR 924K has an MSRP of $177,800. If you're looking to rent one of these machines, you can expect to pay around $700 for a day, $350 for a half day, and $2,150 for a week.
The estimated monthly maintenance costs for the CATERPILLAR 924K are around $2,000. This includes the cost of oil changes, filter replacements, and other necessary repairs. The estimated fuel cost per month is about $1,500, and the hourly fuel cost estimation is around $30.
If you take a look around our site, you can find various models that are similar to the Caterpillar 924K Wheel Loader. For example, you may want to consider the Caterpillar 930K, the Caterpillar 950K, or the Caterpillar 962K. All three of these models offer similar features and performance, but they may vary slightly in terms of size and power. You can have a look at these models Caterpillar 926M, Caterpillar 906M, Case 621F, and Caterpillar 930K.
The Caterpillar 924K is a powerful and reliable wheel loader that is perfect for a variety of applications. With its impressive operating weight and advanced hydraulic system, it can handle heavy loads with ease. In addition, its reasonable price and estimated monthly maintenance and fuel costs make it an attractive option for many businesses. If you're looking for a similar machine, you may want to consider the Caterpillar 930K, the Caterpillar 950K, or the Caterpillar 962K.