Caterpillar 966m

Cargadores / Cargadoras de Ruedas

The Caterpillar 966M Wheel Loader: A Comprehensive Overview

The Caterpillar 966M Wheel Loader is a powerful and efficient wheel loader that is designed to tackle any job. This machine offers a wide range of features and capabilities that make it an ideal choice for a variety of applications. From excavation and construction to material handling and waste management, the Caterpillar 966M Wheel Loader is a great choice for any job.

Specifications

AtributoCantidad
Precio del modelo$500,300
Precio de alquiler diario$2,560
Precio de alquiler de medio día$1,280
Precio de alquiler semanal$6,400
Peso operativo (libras)51176
Coste de mantenimiento por hora$50
Costo de mantenimiento mensual$4,503
Costo de combustible por mes$0
Consumo de combustible por hora (galones)0
Pagos mensuales de financiación (nuevo)$0
Pagos de financiación mensuales (usados)$0

Cat 966M Specs: A Closer Look

Dimensions - High Lift

Ground Clearance - 1.42ft in

Wheel Base - 11.67ft in

Centerline Of Rear Axle To Edge Of Counterweight - 8.17ft in

Centerline Of Rear Axle To Hitch - 5.83ft in

Height - Top Of Exhaust Pipe - 11.58ft in

Height - Top Of Hood - 9.25ft in

Height - Top Of Rops - 11.75ft in

Hinge Pin Height At Carry - 2.58ft in

Hinge Pin Height At Maximum Lift - 15.75ft in

Lift Arm Clearance At Maximum Lift - 13.58ft in

Maximum Width Over Tires - 9.83ft in

Overall Length - Without Bucket - 26.58ft in

Rack Back - Carry Height - 49 degrees

Rack Back - Maximum Lift - 71 degrees

Rack Back At Ground - 39 degrees

Tread Width - 7.33ft in

Note

All dimensions are approximate and based on L3 XHA2 tires.

Dimensions - Standard Lift

Ground Clearance - 1.42ft in

Rack Back - Maximum Lift - 62 degrees

Centerline Of Rear Axle To Edge Of Counterweight - 7.17ft in

Lift Arm Clearance At Maximum Lift - 11.92ft in

Centerline Of Rear Axle To Hitch - 5.83ft in

Maximum Width Over Tires - 9.83ft in

Note

All dimensions are approximate and based on L3 XHA2 tires.

Tread Width - 7.33ft in

Height - Top Of Exhaust Pipe - 11.58ft in

Height - Top Of Hood - 9.25ft in

Overall Length - Without Bucket - 23.92ft in

Height - Top Of Rops - 11.75ft in

Rack Back At Ground - 42 degrees

Hinge Pin Height At Carry - 2.08ft in

Rack Back - Carry Height - 50 degrees

Wheel Base - 11.67ft in

Hinge Pin Height At Maximum Lift - 13.92ft in

Specifications

Engine

Displacement - 568cu in

Bore - 4.6in

Stroke - 5.9in

Net Power - Iso 9249 - 276hp

Engine Model - Cat C9.3 ACERT

Note

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.

Peak Gross Torque - 1,200 Rpm - Sae J1995 - 1179lb ft

Peak Gross Torque - 1,200 Rpm - Iso 14396 - 1166lb ft

Maximum Net Power - 1,700 Rpm - Iso 9249 - 276hp

Maximum Net Power - 1,700 Rpm - Iso 9249 - Metric - 280hp

Maximum Net Power - 1,700 Rpm - Sae J1349 - 276hp

Maximum Net Power - 1,700 Rpm - Sae J1349 - Metric - 280hp

Maximum Net Torque - 1,000 Rpm - 1126lb ft

Maximum Power - 1,800 Rpm - Iso 14396 - 307hp

Maximum Power - 1,800 Rpm - Iso 14396 - Metric - 311hp

Maximum Power - 1,800 Rpm - Sae J1995 - 311hp

Maximum Power - 1,800 Rpm - Sae J1995 - Metric - 315hp

Maximum Gross Power - Sae J1995 - 311hp

Maximum Net Power - Sae J1349 - 276hp

Maximum Gross Power - 1,800 Rpm - Sae J1995 - 311hp

Maximum Net Torque - 1,000 Rpm - Sae J1349 - 1126lb ft

Operational

Operating Weight - 51176lb

Transmission

Forward - 1 - 4mph

Forward - 2 - 8.1mph

Forward - 3 - 14.6mph

Forward - 4 - 24.9mph

Note

Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm (32.5 in) roll radius.

Reverse - 1 - 4.4mph

Reverse - 2 - 8.9mph

Reverse - 3 - 16.1mph

Reverse - 4 - 24.9mph

Weights

Operating Weight - 51176lb

Note

Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.2 m3 (5.5 yd3) general purpose bucket with BOCE.

Buckets

Bucket Capacities - 2.5-9.2 m (3.25-12.0 yd)

Axles

Front - Fixed

Rear - Oscillating 13 degrees

Maximum Single-Wheel Rise And Fall - 19.5in

Hydraulic System

Hydraulic Cycle Time - Total - 10.1 s

Implement System - Maximum Operating Pressure - 4496 psi

Implement Pump Type - Variable Displacement Piston

Implement System - Maximum Pump Output At 2,200 Rpm - 95 gal/min

Hydraulic Cycle Time - Rated Payload - Raise From Carry Position - 6.1 s

Hydraulic Cycle Time - Rated Payload - Dump, At Maximum Raise - 1.4 s

Hydraulic Cycle Time - Rated Payload - Lower, Empty, Float Down - 2.6 s

Hydraulic Cycle Time - Rated Payload - Total - 10.1 s

Implement System - Optional 3rd/4th Function Maximum Flow - 69 gal/min

Implement System - Optional 3rd/4th Function Maximum Pressure - 3000 psi

Brakes

Brakes meet ISO 3450 standards

Operating Specifications

Note (1)

For a machine configuration as defined under ?Weight.?

Note (2)

Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Breakout Force - 38984lb

Static Tipping Load - Full 37 Degrees Turn - With Tire Deflection - 32329lb

Static Tipping Load - Full 37 Degrees Turn - No Tire Deflection - 34873lb

Service Refill Capacities

Cooling System - 18.9gal

Fuel Tank - 82.7gal

Crankcase - 6.5gal

Def Tank - 4.4gal

Hydraulic Tank - 33gal

Transmission - 15.5gal

Differential - Final Drives - Front - 15.1gal

Differential - Final Drives - Rear - 15.1gal

Note

*Must meet the requirements outlined in ISO 22241-1.

Def Tank* - 4.4gal

Sound

Note (1)

These sound values are for specific operating conditions only.

Note (2)

Machine and operator sound levels will vary at different engine and/or cooling fan speeds.

Note (3)

Hearing protection may be needed when the machine is operated with a cabin that is not properly maintained.

Note

*Distance of 15 m (49.2 ft), moving forward in second gear ratio.

With Cooling Fan Speed At Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)

70 dB(A)

With Cooling Fan Speed At Maximum Value - Exterior Sound Power Level (Iso 6395:2008)

109 dB(A)

With Cooling Fan Speed At Maximum Value - Exterior Sound Pressure Level (Sae J88:2013)

76 dB(A)*

With Cooling Fan Speed At 70% Of Maximum Value - Operator Sound Pressure Level (Iso 6396:2008)**

69 dB(A)

With Cooling Fan Speed At 70% Of Maximum Value - Exterior Sound Power Level (Iso 6395:2008)**

108 LWA***

Exterior Sound Power Level - Iso 6395:2008

109 dB(A)

Exterior Sound Pressure Level - Sae J88:2013

76 dB(A)

Operator Sound Pressure Level - Iso 6396:2008

70 dB(A)

Note (4)

Hearing protection also may be needed when the doors and/or windows are open for extended periods or in a noisy environment.

Cab

Rops/Fops

ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards

Bucket Capacities

Bucket Range - 3.20-7.40 m (4.19-9.68 yd)

Engine - Tier 3/Stage Iiia Equivalent

Emissions - Tier 3/Stage IIIA

Engine - Tier 4 Final/Stage Iv

Emissions - Tier 4/Stage IV

Common Uses

The Caterpillar 966M is most commonly used for excavation, construction, material handling, and waste management. It is capable of lifting and carrying large loads of material, as well as digging trenches and holes. It can also be used for snow removal and landscaping. It is also great for loading and unloading materials from trucks and trailers.

Price

The Caterpillar 966M has a price of $500,300. However, it can be rented for a day at a cost of $2,560, a half-day at a cost of $1,280, or a week at a cost of $6,400.

Operating Weight

The Caterpillar 966M has an operating weight of 51,176 pounds. This makes it ideal for carrying and lifting heavy loads.

Maintenance and Fuel Costs

The estimated monthly maintenance costs for the Caterpillar 966M are $3,000. The estimated fuel cost per month is $2,000, and the estimated hourly fuel cost is $15.

Similar Models

If you are looking for a similar model to the Caterpillar 966M, there are several other wheel loaders available. The Caterpillar 966G, Caterpillar 988K, Caterpillar 972M, Caterpillar 950M, Caterpillar 982M, and Caterpillar 988M are all great options.

Conclusion

The Caterpillar 966M is a powerful and efficient wheel loader that is designed to tackle any job. It offers a wide range of features and capabilities that make it an ideal choice for a variety of applications. From excavation and construction to material handling and waste management, the Caterpillar 966M is a great choice for any job. It has a price of $500,300, an operating weight of 51,176 pounds, and estimated monthly maintenance costs of $3,000. It is also available for rent at a day, half day, and weekly rate. If you are looking for a similar model, there are several other wheel loaders available, such as the Caterpillar 988K, Caterpillar 972M, Caterpillar 982M, and Caterpillar 988M.

Obtenga las últimas ofertas en Loaders. Regístrese para recibir alertas por correo electrónico.