The Caterpillar TL943: A Comprehensive Overview

Cat TL943 Telehandler: At a Glance

ENGINE

Engine Model - Cat® C3.6L

Gross Power - Basic - 73.7 HP

Gross Power - Premium - 111 HP

Note *Meets U.S. EPA Tier 4 Final emission standards.

WEIGHTS

Operating Weight - 26,852 lb

OPERATING SPECIFICATIONS

Rated Load Capacity - 9,000 lb

Maximum Lift Height - 43 ft

Load at Maximum Height - Stabilizers Down - 7,000 lb

Maximum Forward Reach - 31 ft

Load at Maximum Reach - Stabilizers Down - 2,700 lb

Top Travel Speed - 18 mile/h

DIMENSIONS

Height - 8.16 ft

Width - 8 ft

Wheel Base - 11.25 ft

Length - Fork Face - 20.5 ft

Ground Clearance - 17 in

Turning Radius - Over Tires - 12 ft

TIRES

Standard - 370/75-28 Duraforce Air

Optional (1) - 370/75-28 Duraforce Foam Fill

Optional (2) - 315/95-28 Telemaster Solid

Optional (3) - 14.00-24 16PR Air

Optional (4) - 14.00-24 12PR Foam

Optional (5) - 370/75-28 Non-Marking Air

Optional - 370/75-28 Non-Marking Foam

SERVICE REFILL CAPACITIES

Fuel Tank - 38 gal (US)

Hydraulic Tank - 49 gal (US)

BOOM PERFORMANCE

Boom Up - 9.9 s

Boom Down - 8.5 s

Tele In - 14.6 s

Tele Out - 14.5 s

Drawbar Pull - Basic - 22,619 lb

Drawbar Pull - Premium - 25,589 lb

BRAKING SYSTEM

Parking Brake - Spring-applied hydraulic release on front axle

BRAKES

Service Brakes - inboard wet disc brakes on front and rear axles

Parking Brakes - spring-applied hydraulic release on front axle

OPERATOR STATION

Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab

INSTRUMENTATION

Volt meter, hour meter, engine oil pressure gauge, fuel gauge, water temperature gauge

WORK TOOLS

Pallet Forks - Option 2

[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)

Cubing Forks

[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)

Pallet Forks - Option 1

[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)

Carriages - Dual Fork Positioning - 50 in

Carriages - Swing - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)

Carriages - Side Shift - 50 in

Lumber Forks - Option 1 - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)

Carriages - Standard Tilt - 50 in

Pallet Forks - Option 3 - [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)

Standard Equipment

TELESCOPIC BOOM

• Boom angle indicator

ELECTRICAL

• Alternator, 60 amp, 12 volt

• Battery, 12 volt, 1000 CCA

• Horn

• Alarm, backup

OPERATOR STATION

• Canopy, ROPS/FOPS

• Joystick, single electronic

• Adjustable joystick wristrest

• Low step, grab bars for easy entry

• Seat - vinyl, suspension with Cat logo

• Steering wheel spinner knob

• Floor mat - heavy duty

• Left side rear view mirror

• Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill

• Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.

• Park Brake with indicator light

• Steering Wheel with Cat logo

• Cat keys and locks

• Brakes - wet disc service

• Belt, seat - 3" wide

POWER TRAIN

• Engine, Cat C3.6L - 55kW (73.7 hp) or 83kW (111hp) gross horsepower

• Thermal starting aid

• Transmission, Cat PG145 6 speed Power-shift, 4-speed forward, 3-speed reverse

• Cat filters, hoses and couplings

• Axles - Dana

• Steering - 4 wheel

• Drive - 4 wheel

STRUCTURE

• Chassis, frame level up to 10 degrees when operating in rough, uneven terrain

• Cat IT Coupler

ANTI-FREEZE

• Coolant - Anti-freeze, 50/50 Mix

TIRES

• Tires - 370/75-28 Duraforce Air

OTHER EQUIPMENT

• Integrated lift and tie down points

• Standard Cat color paint

• Auxillary hydraulics for auxillary attachments (one function)

Optional Equipment

TELESCOPIC BOOM

• Hydraulic IT Coupler (includes Auxiliary Electrics)

ELECTRICAL

• Work Light Group: 3 Cab mounted Lights -- 2 forward, 1 rearward; 1 reversing light; 2 Boom mounted Lights, 1 rotating beacon

• Engine heater block

• Heater - open cab

• Road Light Group — Headlights, Brake Lights, Turn Signals

OPERATOR STATION

• Air conditioning

• Single Joystick - with Rocker Switch

• EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)

• Skylight Wiper

• Brick guard - Front and top.

TIRES

• Tires - 370/75-28 Duraforce Foam Fill

• Tires - 315/95-28 Telemaster Solid

• Tire - 14.00-24 16PR Air

• Tire - 14.00-24 12 PR Foam

• Tires - 370/75-28 Non-Marking Air

OTHER EQUIPMENT

• Fenders

• Tow Hook - Pintle Type

• Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater

WORK TOOLS

• Carriage - side shift, 48 in. (available from factory)

• Lifting Hook - fork mounted (available from factory)

• Truss Broom

• Carriage - standard tilt, 50 in. (available from factory)

• Carriage - standard rotate, 50 in. (available from factory)

• Carriage - swing, 72 in., 100 degrees, 9,000 lb. capacity, 5,000 lb. swung (available from factory)

• Pallet Forks - two 60 in, 2 in x 6 in, 9,000 lb. capacity per pair (available from factory)

• Pallet Forks - two 48 in, 2.36 in x 4 in, 9,000 lb. capacity per pair (available from factory)

• Cubing Forks - two 48 in, 2 in x 2 in, 3,800 lb. capacity per pair (available from factory)

• Bucket - General Purpose 1.3 Cu. Yd.

• Bucket - Material Handling 1.95 Cu. Yd.

• Bucket - Multi-Purpose, 1.3 Cu. Yd.

• Work Platform — 8 ft x 4 ft with maximum capacity of 1,000 lbs. Includes enclosed fork pockets, side entry/exit gate, removable front rail and wire mesh floor.

Common Uses

The Caterpillar TL943 is most commonly used in construction and industrial applications. It's perfect for lifting and moving heavy loads, such as large pieces of equipment, heavy machinery, and construction materials. It is also great for moving large amounts of material, such as dirt, gravel, and sand. This machine is also great for moving heavy loads over long distances, making it perfect for those who need to transport materials from one place to another.

Price

The Caterpillar TL943 is available for purchase for $195,000. It is also available for rent for a day at a rate of $700, a half day at a rate of $350, or a week at a rate of $1,800.

Operating Weight

The Caterpillar TL943 has an operating weight of 26,525 pounds. This makes it one of the heaviest machines in its class, allowing it to move large amounts of material with ease.

Maintenance Costs

The estimated monthly maintenance costs for the Caterpillar TL943 are approximately $500. This includes regular maintenance and repairs, as well as any necessary parts replacements.

Fuel Costs

The estimated fuel cost per month for the Caterpillar TL943 is approximately $400. The estimated hourly fuel cost is $25.

Similar Models

If you are looking for a similar machine to the Caterpillar TL943, there are several other models available. These include the CAT 953C, the Caterpillar TH63, the CAT 963C, the GENIE GTH1056, the CAT 973C, and the CAT 983C. Each of these machines offers similar features and capabilities, so you can be sure to find the perfect machine for your needs.

Conclusion

The Caterpillar TL943 is a powerful, reliable machine that is perfect for those who need to move large amounts of material quickly and efficiently. Its operating weight and fuel efficiency make it a great choice for those who need to transport materials over long distances. It's also available for purchase or rental at a reasonable price. If you are looking for a similar machine, there are several other models available that offer similar features and capabilities.