Cat 908M Specs: A Closer Look
Dimensions - With Iso Coupler - Approximate
Ground Clearance - 13in
Maximum Fork Height - 10.9ft in
Cab Heigh - 8.7ft in
Fork Height At Maximum Reach - 4.8ft in
Maximum Reach - 4.3ft in
Dig Depth - 3.9in
Overall Length - With Bucket - 18.5ft in
Overall Length - With Forks - 19.7ft in
Fork Reach At Maximum Height - 1.5ft in
Reach At Ground Level - 2.6ft in
Fork Depth Below Ground - 2.8in
Maximum Dump Height - 8.6ft in
Reach At Maximum Dump Height - 2.5ft in
Articulation Angle - Degrees - 39
Tire Gauge - 5.2ft in
Hinge Pin At Maximum Height - 11.2ft in
Turning Radius - Inside Tire - 6.8ft in
Dump Angle At Maximum Height - Degrees - 45
Turning Radius - Over Bucket - 14.9ft in
Load Over Height - 10.5ft in
Wheel Base - 7.1ft in
Departure Angle - Degrees - 33
Width - Over Bucket - 6.8ft in
Machine Width - 6.5ft in
Dimensions - With Ssl Coupler - Approximate
Ground Clearance - 13in
Overall Length - With Bucket - 18.9ft in
Cab Height - 8.7ft in
Departure Angle - Degrees - 33
Dig Depth - 3.7in
Dump Angle At Maximum Height - Degrees - 45
Fork Depth Above Ground - 1.2in
Fork Height At Maximum Reach - 5ft in
Fork Reach At Maximum Height - 1.9ft in
Hinge Pin At Maximum Height - 11.2ft in
Load Over Height - 10.5ft in
Machine Width - 6.5ft in
Maximum Dump Height - 8.31ft in
Maximum Fork Height - 10.8ft in
Maximum Reach - 4.7ft in
Articulation Angle - Degrees - 39
Overall Length - With Forks - 20.2ft in
Reach At Ground Level - 3ft in
Reach At Maximum Dump Height - 2.8ft in
Tire Gauge - 5.2ft in
Turning Radius - Inside Tire - 6.8ft in
Turning Radius - Over Bucket - 15ft in
Wheel Base - 7.1ft in
Width - Over Bucket - 6.75ft in
Engine
Net Power - 74hp
Displacement - 201cu in
Bore - 3.7in
Stroke - 4.7in
Emissions
*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
Engine Model - Cat C3.3B DIT*
Note (1)
Net power ratings are tested at the reference conditions for the specified standard.
Note (2)
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)
Flywheel per the SAE reference conditions with the fan at maximum speed.
Note
*Meets U.S. EPA Tier 4 Final/EU Stage IIIB (M Series) or Tier 4 Interim/Stage IIIA (M Series [EUSO]) emission standards.
Maximum Gross Power - Sae J1995 - 74hp
Maximum Net Power - Sae J1349 - 68hp
Maximum Gross Power - Iso 14396 - 73hp
Rated Net Power - 2,500 Rpm - Sae J1349 - 68hp
Maximum Net Power - Iso 9249 - 69hp
Maximum Gross Power - 73hp
Maximum Gross Power - Iso 14396 (Din) - 74hp
Maximum Gross Torque - Iso 14396 - 192lb ft
Maximum Net Torque - Sae J1349 - 189lb ft
Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 - 191lb ft
Note (5)
The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
Rated Net Power - 2,400 Rpm - Sae J1349 - 73hp
Rated Net Power - 2,400 Rpm - Iso 9249 (1977)/Eec 80/1269 - 74hp
Drive Train
Forward - Range 1 - 6mph
Forward - Range 2 - 12mph
Forward - High Range - 22mph
Reverse - Range 1 - 6mph
Reverse - Range 2 - 12mph
Reverse - High Range - 22mph
Operational
Operating Weight - 14032lb
Steering
Maximum Working Pressure - Steering Pump - 3191 psi
Steering Articulation Angle - Each Direction - 39 degrees
Steering Cylinder, Double Acting - Bore Diameter - 3.1in
Steering Cylinder, Double Acting - Rod Diameter - 1.4in
Steering Cylinder, Double Acting - Stroke - 11.8in
Nominal Flow - Steering Pump - 12 gal/min
Maximum Steering Torque - 0 Degrees (Straight Machine) - 42506lb ft
Maximum Steering Torque - 39 Degrees (Full Turn) - 31398lb ft
Steering Ac Cycle Times - Full Left To Full Right - 2,620 Rpm - 3 s
Number Of Steering Wheel Turns - Full Left To Full Right Or Full Right To Full Left - <6 turns
Weights
Operating Weight - 14032lb
Tires
Note (1)
Other tire choices available, contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Weights
Note
Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. - 908M is configured with a 1.1 m3 (1.44 yd3) bucket with bolt-on cutting edge.
Tires
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1)
360/80 R20 TRI2 Nokian
Option (2)
375/75 R20 XZSL Michelin
Option (3)
400/70 R20 XMCL Michelin
Option (4)
400/70 R20 Bibload Michelin
Option (5)
405/70 R20 SPT9 Dunlop
Option (6)
12.5-20 ATU Firestone
Buckets
Bucket Capacities - 0.9 m3-1.5 m3 (1.2 yd3-2.0 yd3)
Bucket Capacities - Iso Coupler - 0.9-1.5 m3
Bucket Capacities - Ssl Style Coupler - 1.2-2.0 yd3
General Purpose - 1.1-1.3 m3 (1.44-1.7 yd3)
Light Material - 2yd3
Hydraulic System
Hydraulic Cycle Time - Dump - 1.3 s
Main Relief - 3rd Aux Flow: Standard - 22 gal/min
Main Relief - 3rd Aux Flow - 3400 psi
Main Relief - 3rd Aux Flow: High Flow - 34 gal/min
Hydraulic Cycle Time - Lift - 5.2 s
Hydraulic Cycle Time - Rackback - 2.1 s
Hydraulic Cycle Time - Lower - 3.2 s
Operating Specifications
Rated Bucket Capacity - 1.4yd3
Full Turn Tipping Load - 8311lb
Tipping Load - Straight - Iso 14397-1 - 9757lb
Tipping Load - Full Turn - Iso 14397-1 - 7947lb
Clearance - Full Lift And 45 Degrees Dump - 8ft in
Reach - Full Lift And 45 Degrees Dump - 3ft in
Steering Articulation Angle - Each Direction - 39 degrees
Service Refill Capacities
Cooling System - 4.4gal
Fuel Tank - 20.6gal
Hydraulic Tank - 12.2gal
Hydraulic System - Including Tank - 19gal
Engine Crankcase - 3gal
Transmission - Gear Box - 2.9gal
Hydraulic System - 18.5gal
Engine Oil - 3gal
Cab
Rops - SAE J1040 MAY94, ISO 3471-1994.
Fops - SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note (1)
Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A) typical.
Loader Hydraulic System
Lift Cylinder, Double Acting – Stroke - 27.5in
Tilt Cylinder, Double Acting – Stroke - 16.4in
Maximum Flow - Implement Pump - 22 gal/min
3rd Function Maximum Working Pressure - 3408 psi
Maximum Working Pressure - Implement Pump - 3408 psi
Relief Pressure - Tilt Cylinder Rod - 2756 psi
Boost Flow Maximum Pressure - 3191 psi
Lift Cylinder, Double Acting - Bore Diameter - 3.3in
Lift Cylinder, Double Acting - Rod Diameter - 2in
Tilt Cylinder, Double Acting - Bore Diameter - 3.9in
Tilt Cylinder, Double Acting - Rod Diameter - 2.2in
Hydraulic Cycle Time - 1,800 Rpm - Raise, Ground Level To Maximum Lift - 5.5 s
Hydraulic Cycle Time - 1,800 Rpm - Dump, At Maximum Lift Height - 1.5 s
Hydraulic Cycle Time - 1,800 Rpm - Float Down, Maximum Lift To Ground Level - 2.6 s
Hydraulic Cycle Time - 1,800 Rpm - Total Cycle Time - 9.6 s
Hydraulic Cycle Time - 1,000 Rpm - Raise, Ground Level To Maximum Lift - 9.6 s
Hydraulic Cycle Time - 1,000 Rpm - Dump, At Maximum Lift Height - 3 s
Hydraulic Cycle Time - 1,000 Rpm - Float Down, Maximum Lift To Ground Level - 2.6 s
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow - 22 gal/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow - 33 gal/min
Relief Pressure - Tilt Cylinder Head - 4496 psi
Maximum Material Densities - General Purpose Bucket
Bucket Width - 81in
Maximum Material Density - 2611 lb/yd
Rated Capacity - 1.4yd3
Dump Height - 100in
Maximum Material Densities - Light Material Bucket
Bucket Width - 82in
Maximum Material Density - 1743 lb/yd
Rated Capacity - 2yd3
Dump Height - 92in
Maximum Material Densities - Multi Purpose Bucket
Bucket Width - 81in
Maximum Material Density - 3251 lb/yd
Rated Capacity - 1.2yd3
Dump Height - 104in
Operating Specifications - Iso Coupler
Rated Bucket Capacity - 1.4yd3
Rated Operating Load At Full Turn – Bucket - 4438lb
Tire Size - 405/70 R20
Straight Tipping Load – Bucket - 10891lb
Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center) - 5561lb
Breakout Force – Bucket - 13712lb ft
Full Turn Static Tipping Load – Bucket - 8874lb
Rack Back - Transport Position - 52
Operating Specifications - Ssl Coupler
Rated Bucket Capacity - 1.4yd3
Rated Operating Load At Full Turn – Bucket - 4156lb
Tire Size - 405/70 R20
Straight Tipping Load – Bucket - 10207lb
Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center) - 5192lb
Breakout Force – Bucket - 10566lb ft
Full Turn Static Tipping Load – Bucket - 8311lb
Rack Back - Transport Position - 52
Travel Speeds
Speed 1 - 6.2mph
Speed 2 - 12.4mph
High Speed - 21.7mph
Cab Features - Canopy
External Knock Back Mirrors - Standard
Lockable Storage Box - Standard
Sun Visor - Standard
Cup Holder - Standard
Vinyl Suspension Seat - Standard
Adjustable Internal Mirror - Standard
Coat Hook - Standard
Fixed Steering Column - Standard
Cab Features - Comfort Cab
Left Window – Sliding - Standard
Cat Radio/Cd/Mp3/Wma/Aux - Optional
Sun Visor - Standard
Heater - Standard
Heated Rear Window - Standard
Adjustable Steering Column - Standard
Cup Holder - Standard
Air Conditioner - Optional
Lockable Storage Box - Standard
Cloth Suspension Seat, Arm Rest - Standard
Coat Hook - Standard
External Knock Back Mirrors - Standard
Radio-Ready Kit (Wiring, Speaker, Aerial And Grilles) - Optional
Rear Blind - Optional
Two Access Doors - Standard
Adjustable Internal Mirror - Standard
Cabin Light - Standard
Machine Security System - Optional
Cab Features - Deluxe Cab
Air Conditioner - Optional
Machine Security System - Optional
Cat Radio/Cd/Mp3/Wma/Aux - Optional
Adjustable Internal Mirror - Standard
Rear Blind - Optional
Adjustable Steering Column - Standard
Heated Rear Window - Standard
Coat Hook - Standard
External Knock Back Mirrors - Standard
Cloth, Electric Air Suspension, Arm/Head Rest, Lumbar Support And Heated Back Seat - Standard
Cup Holder - Standard
Lockable Storage Box - Standard
Sun Visor - Standard
Two Access Doors - Standard
Left Window – Sliding - Standard
Cabin Light - Standard
Heater - Standard
Radio-Ready Kit (Wiring, Speaker, Aerial And Grilles) - Standard
Right Window – Sliding - Standard
Dimensions With Bucket (Approximate) - Standard Lift - With Iso Coupler
Height - Ground To Cab** - 8.7ft in
Height - Ground Clearance** - 1.1ft in
Length - Wheel Base - 7.1ft in
Length - Overall* - 18.5ft in
Reach - Bucket At 45 Degrees* - 2.5ft in
Dig Depth** - 3.9in
Clearance - Bucket At 45 Degrees * - 8.6ft in
Clearance - Level Bucket** - 10.5ft in
Height - Bucket Pin** - 11.2ft in
Width – Bucket - 6.8ft in
Width - Tread Center - 5.1ft in
Turning Radius - Over Bucket - 14.9ft in
Turning Radius - Inside Of Tires - 6.8ft in
Machine Width - 6.5ft in
Dump Angle At Full Lift - 45 degrees
Departure Angle - 33 degrees
Articulation Angle - 39 degrees
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Dimensions With Bucket (Approximate) - Standard Lift - With Ssl Coupler
Height - Ground To Cab** - 8.7ft in
Height - Ground Clearance** - 1.1ft in
Length - Wheel Base - 7.1ft in
Length - Overall* - 19ft in
Reach - Bucket At 45 Degrees* - 2.9ft in
Dig Depth** - 4.2in
Clearance - Bucket At 45 Degrees * - 8.2ft in
Clearance - Level Bucket** - 10.5ft in
Height - Bucket Pin** - 11.2ft in
Width – Bucket - 6.8ft in
Width - Tread Center - 5.1ft in
Turning Radius - Over Bucket - 14.9ft in
Turning Radius - Inside Of Tires - 6.8ft in
Machine Width - 6.5ft in
Dump Angle At Full Lift - 45 degrees
Departure Angle - 33 degrees
Articulation Angle - 39 degrees
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Common Uses
The Caterpillar 908M Compact Track Loader is commonly used for earthmoving, landscaping, construction, and material handling. It can be used to move and lift heavy materials, as well as perform light-duty grading and excavation. It is also great for hauling and loading materials. With its low ground pressure, it's perfect for working on soft or uneven terrain.
Price and Rental Information
The Caterpillar 908M Compact Track Loader has a price tag of $146,154. It can be rented for a day at a cost of $525, a half-day at $263, and a week at $1,200.
Operating Weight and Maintenance Costs
The Caterpillar 908M Wheel Loader has an operating weight of 14,323 lbs. The estimated monthly maintenance costs are approximately $400, and the estimated fuel cost per month is approximately $1,000. The hourly fuel cost estimation is $2.50.
Similar Models
If you are looking for a similar model to the Caterpillar 908M Compact Track Loader, there are several other models available. Some other popular models include the Caterpillar 299D3, the Caterpillar 906M, the Caterpillar 299D2, the Caterpillar 907M, and the Caterpillar 910M.
Conclusion
The Caterpillar 908M Compact Track Loader is a reliable and cost-effective machine that is designed to provide maximum productivity and efficiency in tight spaces. It is great for earthmoving, landscaping, construction, and material handling. With its low ground pressure, it is perfect for working on soft or uneven terrain. It has an operating weight of 14,323 lbs and an estimated monthly maintenance cost of $400. The estimated fuel cost per month is $1,000, and the hourly fuel cost estimation is $2.50. If you are looking for a similar model, there are several other models available such as the Caterpillar 906M, the Caterpillar 907M, and the Caterpillar 910M.