Overview

The Caterpillar 926M Wheel Loader is a powerful machine that's designed to move heavy material quickly and efficiently. It features a powerful engine, a four-speed transmission, and a maximum operating weight of 28742 lbs. The 926M also features a large cab with an ergonomic design that's comfortable and easy to use. Additionally, the 926M has a variety of attachments, including buckets, pallet forks, and more, allowing the machine to be used for a wide variety of tasks.

The Cat 926M: Key Features

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application. A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

• Saves fuel and reduces cab sound levels

• Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

• Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%

• Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Work Made Easy

OPTIMIZED Z-BAR LINKAGE

The optimized Z-bar linkage combines the digging efficiency of a traditional Z-bar with integrated tool carrier capabilities for great performance and versatility. Visibility to bucket corners and fork tips at ground level remain excellent while sight lines at maximum lift are improved with a Generation III lift arm design. Lift higher and reach further with optional High Lift linkage available on all three models.

QUICK LOADING PERFORMANCE SERIES BUCKETS

Performance Series Buckets deliver up to 10% higher fill factors compared to previous models, better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor to take a bigger bite of the pile, an open throat to heap higher and curved side bars to help with material retention.

Enjoy All Day Comfort

• A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors

  • Information at a glance with large primary LCD display

  • Heated and cooled seat option

  • Optional Ride Control

  • Exclusive electro-hydraulic cylinder snubbing

  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

Cat 926M Specs: A Closer Look

Engine

Displacement - 427cu in

Bore - 4in

Stroke - 5in

Emissions

Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.

Engine Model - Cat C7.1 ACERT

Note (1)

* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Note (3)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Note (4)

Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Maximum Gross Power - 153hp

Rated Net Power - 148hp

Maximum Rated Gross Power - Iso 14396 (Din) - 155hp

Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)

1800rpm

Maximum Rated Gross Power - Iso 14396

153hp

Maximum Rated Gross Power - Iso 14396 (Performance Power Mode: Range 1-4)

153hp

Maximum Rated Gross Power - Iso 14396 (Din) (Performance Power Mode: Range 1-4)

155hp

Rated Net Power - 1,800 Rpm - Sae J1349 At Minimum Fan Speed (Performance Power Mode: Range 1-4)

148hp

Rated Net Power - 1,800 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Performance Power Mode: Range 1-4)

149hp

Rated Net Power - 1,800 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Performance Power Mode: Range 1-4)

151hp

Maximum Gross Torque - Iso 14396 (Performance Power Mode: Range 1-4)

531lb ft

Maximum Net Torque - Sae J1349 (Performance Power Mode: Range 1-4)

511lb ft

Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Performance Power Mode: Range 1-4)

517lb ft

Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)

1600rpm

Maximum Rated Gross Power - Iso 14396 (Standard Power Mode: Range 1-3*)

146hp

Maximum Rated Gross Power - Iso 14396 (Din) (Standard Power Mode: Range 1-3*)

148hp

Rated Net Power - 1,600 Rpm - Sae J1349 At Minimum Fan Speed (Standard Power Mode: Range 1-3*)

141hp

Rated Net Power - 1,600 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Standard Power Mode: Range 1-3*)

142hp

Rated Net Power - 1,600 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Standard Power Mode: Range 1-3*)

144hp

Maximum Gross Torque - Iso 14396 (Standard Power Mode: Range 1-3*)

531lb ft

Maximum Net Torque - Sae J1349 (Standard Power Mode: Range 1-3*)

511lb ft

Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Standard Power Mode: Range 1-3*)

517lb ft

Operational

Operating Weight - 28770lb

Power Train

Front Axle - Fixed

Rear Axle - Oscillating

Front Axle - Traction Aid - Standard - Locking differential

Rear Axle - Traction Aid - Optional - Limited slip differential

Note (1)

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Note (2)

Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.

Brakes - Parking - Spring applied hydraulically released

Brakes - Service - Inboard wet disc

Rear Axle - Oscillation Angle By Tire Size - 17.5 R25 - 13.5 degrees

Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65 - 10.5 degrees

Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder - 7 degrees

Transmission

Note

* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Steering

Maximum Working Pressure - Steering Pump - 3500 psi

Steering Cylinder, Double Acting - Bore Diameter - 2.8in

Steering Cylinder, Double Acting - Rod Diameter - 1.6in

Steering Cylinder, Double Acting - Stroke - 17.2in

Maximum Steering Torque - 0 Degrees (Straight Machine) - 37155lb ft

Maximum Flow - Steering Pump - 34 gal/min

Maximum Steering Torque - 40 Degrees (Full Turn) - 27747lb ft

Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited - 2.8 s

Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed - 2.4 s

Note (1)

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Transmission

Forward And Reverse - Range 1* - 1-13 km/h (0.6-8 mph)

Forward And Reverse - Range 2 - 8mph

Forward And Reverse - Range 3 - 17mph

Forward And Reverse - Range 4 - 25mph

Buckets

Bucket Capacities - 1.9-5.0 m3 (2.5-6.5 yd3)

Operating Specifications

Full Turn Tip Load - 16587lb

Service Refill Capacities

Cooling System - 7.9gal

Fuel Tank - 51.5gal

Hydraulic Tank - 23.8gal

Hydraulic System - Including Tank - 42.3gal

Engine Crankcase - 5.3gal

Transmission - Gear Box - 2.2gal

Diesel Exhaust Fluid (Def) Tank - 5gal

Front Axles - 5.5gal

Rear Axles - 5.5gal

Cab

Rops - ISO 3471: 2008

Fops - ISO 3449: 2005 LEVEL II

Note (1)

Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab

Note (2)

* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.

Loader Hydraulic System

Lift Cylinder, Double Acting - Stroke - 28.7in

Tilt Cylinder, Double Acting - Stroke - 21.9in

Maximum Flow - Implement Pump - 40 gal/min

Note (1)

* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Note (2)

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Note (3)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Maximum Working Pressure - Implement Pump - 3771 psi

Lift Cylinder, Double Acting - Bore Diameter - 4.3in

Lift Cylinder, Double Acting - Rod Diameter - 2.4in

Tilt Cylinder, Double Acting - Bore Diameter - 5.1in

Tilt Cylinder, Double Acting - Rod Diameter - 2.8in

Relief Pressure - Tilt Cylinder - 4061 psi

Maximum Flow - Implement Pump - 3rd Function* - 40 gal/min

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Raise (Ground Level To Maximum Lift)

5.5/6.2 seconds

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Dump (At Maximum Lift Height)

1.5/1.7 seconds

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Float Down (Maximum Lift To Ground Level)

2.6/2.6 seconds

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Total Cycle Time

9.6/10.5 seconds

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

40 gal/min

Relief Pressure - Tilt Cylinder - 3rd And 4th Function Maximum Working Pressure

3771 psi

Relief Pressure - Tilt Cylinder - 3rd And 4th Function Relief Pressure

4061 psi

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Common Uses

The Caterpillar 926M Wheel Loader is a versatile machine that can be used in a variety of industries. It's commonly used in construction, farming, and landscaping. In construction, the 926M is used to move heavy material quickly and efficiently. On farms, the 926M is used to move hay, feed, and other materials. In landscaping, the 926M is used to move soil, rocks, and other materials.

Price

The Caterpillar 926M Wheel Loader is priced at $200,000. Additionally, the machine can be rented for a day for $970, a half day for $485, or a week for $2410. The estimated monthly maintenance costs are $1,500, and the estimated fuel cost per month is $1,000. The estimated hourly fuel cost is $50.

Similar Models

If the Caterpillar 926M Wheel Loader is not the right machine for your job, there are a few other models that may be a better fit. The CATERPILLAR 938M Wheel Loader, Caterpillar 924K Wheel Loader, Caterpillar 950M Wheel Loader, Caterpillar 930M Wheel Loader, Caterpillar 906M, and Caterpillar 962M Wheel Loader are all similar machines that may be more suitable for your needs. Additionally, the John Deere 544K Wheel Loader and the Komatsu WA470-7 Wheel Loader are also great options.

Conclusion

The Caterpillar 926M Wheel Loader is a powerful and reliable machine that is used in a variety of industries. It's designed to move heavy material quickly and efficiently, making it a great choice for any job. With a price tag of $200,000 and estimated monthly maintenance costs of $1,500, the 926M is a great investment for any business. Additionally, the machine can be rented for a day, a half-day, or a week, making it a great choice for short-term projects. If the 926M is not the right machine for your job, there are a few other models that may be a better fit, including the Caterpillar 938M Wheel Loader, Caterpillar 950M Wheel Loader, Caterpillar 962M Wheel Loader, John Deere 544K Wheel Loader, and the Komatsu WA470-7 Wheel Loader.